DM100 S-VDR

Simplified Voyage Data Recorder

The DM100 S-VDR is a legacy simplified VDR built to meet all the requirements of the S-VDR performance standards defined in MSC.163(78) and IEC 61996-2 Ed.2.

DM100 S-VDR
DM100 S-VDR
DM100 S-VDR

Key Features

Conversion Kits

We have developped tailor-made conversion kits, fitting VDRs from more than 45 different existing manufacture models. Our conversion kits make it possible to re-use cable runs and mounting hardware from existing systems on board and enable our certified technicians to complete the installation with minimum effort and reducing your ship's downtime.

Retrofitting your existing VDR, Danelec deliver the mechanical kits which include pre-drilled adaptor plates and mounting brackets for the main unit, memory capsule, and bridge microphones. The kit also includes Remote Data Interface (RDI) units for serial, analog and digital connections, as well as a software tool for conversion of old configuration files.

SoftWare Advanced Protection (SWAP)

Servicing and repairing shipboard electronics can be time consuming and expensive. There are the complicated logistics of scheduling a service call and finding a properly trained technician – sometimes from a remote port. Then there is the question of whether the technicians have the correct spare parts on hand and can complete the repairs in time to meet the ship’s sailing schedule.

Now there is a way to save time and money, while eliminating in-port delays, thanks to the new SWAP solution from Danelec. With SWAP technologyTM, all system software and configuration, as well as programming data, is automatically saved on a hot-swappable memory card that can easily be removed from the old unit and inserted into the new one. Relocating the repair from ship to shore saves hours of time in re-installing software and re-programming the unit.

  • Saves time by enabling onboard repairs to be accomplished in a matter of hours, not days
  • Saves money by reducing man hours for service calls
  • Protects valuable shipboard data on a hot-swappable memory card
  • Keeps ships on schedule, eliminating in-port delays for repairs
Remote Access Solution

VDRConnect is a web-based remote access service available with Danelec Marine VDRs. As a value added interface, VDRConnect allows selective transmission of data from the VDR via satellite to the home office without being limited by satellite capacity onboard vessels. Remote access provides a wide range of benefits concerning control, safety and optimization without the need of physical attendance to the vessel.

Playback Software

VDR Explorer playback software runs on any PC and can provide real-time monitoring and replay recorded data. The recorded data can be presented in a large variety of both graphical and numerical ways, and is extremely easy and user friendly to customize and operate.

Equipment

Standard Equipment
Data Acquisition Unit
Data Acquisition Unit
  • 30 days of recording capacity on built-in SSD
  • 10 inputs for bridge audio and VHF
  • 12 inputs for serial data (IEC 61162-1, IEC 61162-2 and Modbus)
  • 7 inputs for IEC 61162-450 network data (1000BASE-T)
  • AC power (110-230V, 50-60Hz)
  • Built-in UPS with NiMh batteries
W: 495 mm, H: 250 mm, D: 242 mm, W: 11 kg
Protective Fixed Capsule
Protective Fixed Capsule
  • 48 hours of recording capacity
  • 90 days acoustic underwater beacon
  • Supplied with 50 meters cable
  • Ethernet (100BASE-TX) interface
  • Powered from Data Acquisition Unit (PoE)
W: 360 mm, H: 195 mm, D: 208 mm, W: 8 kg
Bridge Control Panel
Bridge Control Panel
  • Interface for Operational Performance Test
  • Built-in graphical color TFT LCD display
  • Ethernet (100BASE-TX) interface
  • Powered from Data Acquisition Unit (PoE)
W: 114 mm, H: 144 mm, D: 64 mm, W: 1.1 kg
Indoor Bridge Microphones
Indoor Bridge Microphones
  • Built-in buzzer for self-test
  • Built-in amplifier and filters
  • Powered from Data Acquisition Unit
W: 84 mm, H: 84 mm, D: 30 mm, W: 0.1 kg
Outdoor Bridge Microphones
Outdoor Bridge Microphones
  • Built-in buzzer for self-test
  • Built-in amplifier and filters
  • IP66 water resistant
  • Powered from Data Acquisition Unit
W: 96 mm, H: 96 mm, D: 60 mm, W: 0.5 kg
Optional Equipment
Float-free Capsule
Float-free Capsule
  • 48 hours of recording capacity
  • Supplied with 50 meters cable
  • Ethernet (100BASE-TX) interface
  • Powered from Data Acquisition Unit (PoE)
  • COMSAR/COSPASS approved EPIRB
W: 236 mm, H: 553 mm, D: 214 mm, W: 4.8 kg
Sensor Interface Unit
Sensor Interface Unit
  • 8 inputs for serial data (IEC 61162-1, IEC 61162-2, Modbus)
  • 8 or 16 inputs for analog data
  • 64 inputs for digital data
  • 1 free slot (modular version)
  • AC power (110-230V, 50-60Hz)
W: 525 mm, H: 342 mm, D: 169 mm, W: 12 kg
Remote Data Interface (Serial/Analog/Digital)
Remote Data Interface (Serial/Analog/Digital)
  • 8 inputs for serial data (IEC 61162-1, IEC 61162-2, Modbus) (serial version)
  • 8 inputs for analog data (analog version)
  • 24 inputs for digital data (digital version)
  • Powered from Data Acquisition Unit or locally
  • Can be daisy chained
  • Can operate as standalone equipment
  • Support for SWAP technology™

Find out more: download the datasheet

W: 160 mm, H: 32 mm, D: 163 mm, W: 0.3 kg
Remote Video Interface (Analog: BNC / Digital: DVI-I)
Remote Video Interface (Analog: BNC / Digital: DVI-I)
  • 2 inputs for video recording
  • RGBHV (analog version)
  • DVI-D / DVI-A (digital version)
  • Ethernet (100BASE-TX) interface
  • Powered from Data Acquisition Unit (PoE)
W: 149 mm, H: 49 mm, D: 206 mm, W: 0.5 kg
Remote Audio Interface (4 / 8 channels)
Remote Audio Interface (4 / 8 channels)
  • 4 / 8 inputs for bridge audio and VHF
  • Ethernet (100BASE-TX) interface
  • Powered from Data Acquisition Unit (PoE)
W: 149 mm, H: 49 mm, D: 256 mm, W: 0.5 kg
Extended Data Storage
Extended Data Storage
  • Up to 18 months of recording time
  • Marine approved (IEC 60945)
  • 512GB, 1TB, 3.8TB or 7.6TB SSD
  • Also available in 2x3.8TB or 2x7.6TB RAID 1 configurations
  • Ethernet (1000BASE-T) interface
  • AC power (110-230V, 50-60Hz) through AC adaptor
W: 61 mm, H: 172 mm, D: 116 mm, W: 1.1 kg
Vessel Remote Server 002 G2
Vessel Remote Server 002 G2
  • 5 x Ethernet (1000BASE-T) ports
  • 1 x RS-422 serial interface
  • 1 x digital input
  • IEC 60945 protected
  • 256GB SSD
  • 1GB RAM
  • 1000 max no. of tags
  • Built-in motion-tracking sensor
  • USB port for future applications
  • 12-24V DC power input
  • AC power (110-230V, 50-60Hz) through AC adaptor
  • Normal or Extended Access operating modes
  • DIN rail mountable or standalone

Find out more: download the datasheet

W: 180 mm, H: 30 mm, D: 100 mm, W: 0.45 kg
VDR Conversion Kit
VDR Conversion Kit
  • Reduces installation time by facilitating replacement of existing equipment regardless of make or model
  • Pre-drilled universal adaptor plates and mounting brackets
  • Serial, digital and analog interfaces
  • Existing cabling can typically be reused
  • Software tool for conversion of old configuration files

Find out more: go to the product page

Downloads

Manuals
User Guide
PDF (7.3MB)
Operator Manual
PDF (2.9MB)
Jotron Tron 40 VDR Users Manual
PDF (8.4MB)
VDR Explorer User Manual
PDF (2.9MB)
Certificates
MED D, Quality System, DNV Wheelmark And USCG
PDF (510.3KB)
DM100 S VDR Type Approval Certificate (Korean Government Approval Certificate)
PDF (738.3KB)