Daniels has developed a Trunking Controller software application called the Trunking Radio System Remote Management that runs on the FreeBSD Operating System of our redundant carrier grade servers. The Trunked Radio System Remote Management for the Trunking Controller contains a number of Graphical User Interface (GUI) screens to support trunking controller programming, operation and maintenance. Representative screens are shown.

  • On the system screen (shown top right) the IP address, frequency and IDs are set for the system.
  • On the channel screen (shown top left) the frequencies, IP addresses and power monitoring features are set for each radio channel (subrack).
  • The remaining screens (group screen and unit screen shown bottom row respectively) enable the programming of the Talk Group IDs (TGIDs), Announcement Groups and Group Calls. Finally the user screen (not shown) assigns the unit ID and private call function.

For all screens Daniels has enabled batch programming to enter in ranges of parameters instead of having to program each user individually. As well the system will accommodate wildcard values allowing a range of users to be able to operate on the system without having to program in all possible combinations. This is extremely valuable for remote or emergency site operation, when users from all over the state will be responding and need to have instant access to the trunked site without reprogramming.

Trunked Radio System Screen Trunked Radio System Screen Trunked Radio System Screen Trunked Radio System Screen